Profix Retro Fit / Low profile single zone Underfloor Heating Kit 110m²

Soleheat is delighted to offer the new Profix panels to make underfloor heating installation that much easier. Simply install the kit and fit your tiles or flooring directly on-top with the lower profile 12mm piping. Due to the low profile nature of the Profix system, it can be installed only using a 14mm depth which gives significant flexibility over the traditional underfloor heating systems. The Soleheat underfloor heating kits come with everything you need to install your kit and uses the highest quality components all with manufacturer backed guarantees.

The kit includes:

– Profix Panels: 300 pcs
– “A” rated low energy Grundfos 3-speed circulation pump
– Automatic temperature control unit & thermomix blending valve
– 12mm Pex-Al-Pex 5 layer underfloor heating pipe: 720 metres
– Dualmix manifold: 9 port / 9 zone, including Manifold Isolating Valves x 2 - Temperature Gauge x 2 - Lockshields with flow meters on each port - Drain/fill valves with blank cap x 2 - Automatic air vent x 2 - Metal fixing brackets x 2
– Heatmiser Digital programmable thermostat x1 
– Pipe reaming tool & pipe cutter
–  12mm Pipe connector cores: x18

Coverage: 110m²

Please check our other Profix upgrade options to get the maximum efficiency from your underfloor system such as the 3mm, 6mm or 10mm bonded insulation to each Profix panel, as well as the Profix self levelling screed compound to give your job the complete finish. 

Should you wish to control the zones independently please select the upgrade option to include electrothermic actuators and a 8 zone wiring centre, giving you full flexibility across each pipe loop.  

Please note the pipe will typically be supplied in 80m lengths, allowing a quick and easy install.

Our high quality WRAS approved pipe also comes with a 50 year manufacturer backed guarantee for full peace of mind!

The Profix Floor Panel has multiple pipe retention clips to secure the pipe in place.

  • The purpose designed supports provide a structural key for tile adhesive and low profile screeds.
  • The snap clips helps to fasten the panels together and the multiple break points with V shaped notches aid in cutting knife alignment.
  • There is the option for high compressive strength insulation layer pre bonded to each panel.
  • Benefits from a unique slide and lock to connect the panels together.
  • Ultra-low profile for a 12mm pipe.
  • 1. Multiple "PIPE RETENTION CLIPS" to secure the pipe in place

    2. "PURPOSE DESIGNED SUPPORTS" to provide a structural key for tile adhesive and low profile screeds

    3. "SNAP CLIPS" to fasten the panels together

    4. Multiple "BREAK POINTS" with V-shaped notches to aid cutting the knife alignment

    5.Optional "HIGH COMPRESSIVE INSULATION LAYER" pre-bonded to each panel

    6. Unique "SLIDE AND LOCK" to connect the panels together

    7. "ULTRA LOW PROFILE" for a 12mm pipe

    Retro Fit / Low profile Multi zone Underfloor Heating Kit 110m²

    • Product Code: Retro Fit / Low profile Multi zone Underfloor Heating Kit 110m²
    • £3,663.60 Ex Tax: £3,053.00

    Available Options

    Tags: Retro Fit / Low profile Multi zone Underfloor Heating Kit 110m²